Snakes are long rod-like apparatuses used by plumbers to remove clogs in pipes. They work in a similar way to a clothes hanger, but with more power and flexibility. The plumber inserts the snake’s auger head into the drain and then unspools it, moving it around until the blockage is dislodged. Then, he tests the water flow to ensure that the blockage is gone.

Using a plumber’s snake

When you need to clear a clog in your drain, you can use a plumber’s snake. It is a long, flexible piece of cable that is used to snake a clog. There are two different types: the ‘naked’ snake, which has a grab handle at one end, and the ‘fixed’ snake, which has a stationary handle. Both have a spiral wire cone at the end and a flexible metal cable or crank.

Plumber’s snakes are usually 25 or 50 feet long, and they work by entering the pipe to clear obstructions. To use a plumber’s snake, you first remove the trap arm. Next, thread the snake’s auger head into the drainpipe or access point on the wall. Once you are inside, you can start snake flushing the drain.

When using a plumber’s snake to snake clogged drains, it is important to have patience and perseverance. The snake’s auger must be fed inch by inch through the drain line to reach the clog. The process can take quite a while, depending on the size of the clog. Bigger clogs are more difficult to break apart. You may need to repeat the process several times to completely remove the blockage.

When using a plumber’s snake, you should be aware that you can accidentally scratch the toilet porcelain when using it. The snake itself is similar to a clothes hanger, but it is longer and offers more power. It is inserted into the drain and uncoiled until it reaches the blockage. Once inside the pipe, the plumber will twist the snake in a circular motion until it grabs the clog. After this, you should check the water flow to ensure that the blockage has been completely removed.

Using a drain rod

Using a drain rod to snake entails gaining access to your drainage system’s internal structures. This involves constructing a tool that rams into the blocked drain to remove the blockage. Professionals use specialized tools to unblock drains and clean out debris efficiently. Some drain rods are flexible and can be inserted back and forth in the pipe. A bendable rod can reach nooks and crannies that a traditional rod can’t.

A drain rod can help break up a blockage by sifting through debris. However, when using the tool, it’s important not to turn the rod clockwise. Turning it the wrong way can unscrew the rod’s attachments and cause it to get stuck in the piping. It is best to use the auger end of the drain rod to break up the obstruction, which will let the debris flow freely through the drainpipe.

If you have a persistent blockage, using a drain rod can help. Unlike drain jetting, drain rods can also be used to remove roots. These roots can cause clogged drains. To unclog a drain with a drain rod, a plumber will need to connect several sections of the rod to the drain. Next, he will perform a drain jetting procedure. In this method, he will pour water down the drain to remove the remaining debris. The procedure is also known as system scrub. This is similar to drain jetting but uses a mix of water and a strong drain cleaner.

The best way to use a drain rod is to follow the instructions on the package carefully. A drain rod can get stuck or break off into the drain if not used correctly. It’s also important to remember to wear rubber gloves while using the drain rod.

Using WD-40

If you’re having trouble getting your drains to drain properly, consider using WD-40 to lubricate them. The blue and yellow solution can be found in most household stores and will help snake out clogged drains and keep them running smoothly. You can also use boiling water to clear them out.

The WD-40 formula was invented in 1953 by a chemical company in San Diego. The formula took over 40 tries to come out just right. The name WD-40 (pronounced “wee-duh”) is still used today to describe the liquid. In addition to drain cleaning, WD-40 can be used for a wide variety of other projects.

The company went public in 1973 and saw its stock price jump 61 per cent on its first day of trading. Larson left the company but the product grew into a household name with a loyal fan base. WD-40 is now found in four out of five US households and is used by 81 percent of professionals.

Click here to learn more about drainage specialists derby