There are several ways to unclog a clogged drain. You can use a plunger, a power auger, or a drain rod. The first method involves using the auger to break up and sift around the obstruction.

Using a rod to unclog a clogged drain

The most common method of unclogging a clogged drain is using a drain rod. These tools are long and flexible. When inserted into the drain, the worm end stabs, twists and hooks the blockage. If the blockage cannot be easily removed, you can also screw on a longer rod.

The rod should be inserted into the drain until you feel resistance, then push forward and backwards until you reach the blockage. After the rod has been inserted, clean it with a drain cleaning solution to prevent contamination. It’s also a good idea to wear safety gear when working with pipes. This will protect you from any spills and splashes.

You can buy drain rods from hardware stores. The rods come in pieces and you have to screw them together. To start, you need two-thirds of the rod. Once you’ve screwed two or three pieces together, you can push the rod as far into the drain as you can.

Using a power auger

A power auger can be used to unclog clogged drain rods. These augers have powerful motors and can unclog pipes with a diameter of 3/4″ to 3″. Unlike manual augers, they are battery powered and come with an auto feeding feature. This feature helps to prevent hand contamination while unclogging drain rods and improves safety and efficiency.

To use a power auger to unclog your drain rod, place it near the drain. Most of these augers come with a foot pedal that allows you to operate the machine hands-free. First, you need to feed the cable through the drain pipe. To do this, set the motor to turn clockwise and push the cable into the pipe. Once you feel resistance, reverse the rotation and back out the cable. Continue this process until the clog is removed.

Once the drain rod reaches the obstruction, you can begin to break up the blockage. It is important to turn the rod clockwise, as turning it counterclockwise may unscrew the attachments and leave a stuck rod. To ensure you get rid of the entire clog, you can run the power auger for a few minutes before pulling out the rod. Once the rod has passed through the obstruction, the water should flow freely.

Using a drain unblocker

Using a drain unblocker to clear a clogged drain rod can be an effective method for clearing a drain. Although the process can be challenging, it is simple enough to complete. First, you will need to determine the type of blockage. Exterior drains often become clogged due to a variety of particles and structures. To ensure that you’re not causing a bigger problem, try to identify the type of blockage before trying to clear the drain with a drain rod. Depending on the type of blockage, you may need to use different methods. However, you should always seek the help of a professional when dealing with a blockage in a sewage drain.

Another common cause of a blocked drain is a heavy downpour. This can cause a backup into your sewer and cause flooding in your home. Moreover, heavy rains can severely damage your sewer pipes.

Using a plunger to unclog a clogged drain

There are two main methods for unclogging a clogged drain rod. The first is to try using a plunger. Using a plunger is a great way to unclog a drain if there is standing water in the drain. To use the plunger, first get a bucket and scoop up the water. Then, use the plunger to push the handle in and out, which will help to push the deeper blockages towards the surface. This method can take a while, so it is best to wear rubber gloves.

If you aren’t confident using a plunger, you can also try a plunger designed for plumbers. These plungers are made with a rubber flange on the bottom, which forms a seal with the drain. When used correctly, a plunger can unclog drain rods with ease.

Another method is to use a plunger and corkscrew attachment. These tools can be purchased in many different brands and are designed for various applications. While a plunger is a useful tool for cleaning drain rods, a corkscrew is more effective for removing stubborn blockages. After using a plunger, you should clean the rod and plunger with a disinfectant.

Click here to learn more about emergency drainage derby