If you live in the UK, how do you unclog an underground outdoor drainage drain? There are a number of different methods. However, there are a few things you can do at home to make sure the job gets done without causing too much damage. Using a pressure hose is a good option for outside drainage drains.
Caustic soda
Caustic soda, which is also known as lye, is a highly corrosive substance that you can use to unclog drainage pipes. Luckily, it is readily available at hardware stores that sell commercial cleaning products. The right concentration of caustic soda will break down drainage debris, and you won’t need a very high concentration to clear your drain. You just need to be careful when handling this solution to avoid damage to your pipes or property.
Although caustic soda is an effective drain cleaner, it should only be used in emergency situations. It is highly corrosive and may cause serious damage to pipes and eyes. For this reason, you should always wear protective clothing when handling this chemical. In addition, it is best to stay away from water-filled areas, as it can cause severe burns to your skin.
Caustic soda is an effective chemical that works by causing a chemical reaction when it comes into contact with organic matter. It is especially effective in clearing up drains that have been clogged and are slow to drain. Caustic soda is an extremely corrosive substance, so you need to make sure you purchase it from a legitimate source and follow proper safety precautions.
While you can unclog a drain using a plunger, drain bladder, or P-trap, caustic soda can cause a fatberg, which is a large blockage made up of grease, fat, and other small particles. If the fatberg is large enough, it can cause significant problems to the water system. Caustic soda should never be used to unclog a fatberg.
Sodium hydroxide
Sodium hydroxide is an excellent product for unclogging clogged pipes. This product is a very strong base and will dissolve grease and fats, allowing water to flow through without clogging the pipe. It is safer than sulfuric acid and has a lower risk of damage to the pipes. However, it does require moisture to work and you should always use this product with caution.
The amount of lye to use depends on the amount of clogging, but in general, half a pound is adequate. However, if your drain is really clogged, you may need as much as 2 pounds. Be sure to be cautious when using lye because the chemical produces a strong exothermic reaction when mixed with water. If you use too much, the water may boil and melt the plastic pipes. Plus, lye can be dangerous for your skin, so always avoid contact with lye before using it to unclog your outdoor drainage pipe.
Sodium hydroxide can be purchased in most hardware stores and supermarkets. This chemical is safe to use in unclogging pipes, but it can react with metal, which means that you should always wear protective gear and read the MSDS before you use it.
Pea shingle
If you’ve clogged an underground outdoor drainage pipe, you may be wondering how to unclog it. Generally, underground drainage pipes are laid in a trench and are usually lined with pea shingle. Before placing the pea shingle, it’s important to make sure that all points of drainage are accessible. An architect or drainage engineer will usually draw up a drainage layout plan for your property. These plans will include key components such as gullies, rodding eyes, and rainwater adaptors.
In most cases, the diameter of the drainage pipe should be less than the width. A standard size is 40mm. In addition, pea gravel should be about 40mm thick. This type of gravel is preferred as it has less resistance and helps water flow more freely. Gravel trenches are an important part of any land drainage system. Otherwise, it will quickly clog with debris.
Click here to learn more about drain clearance derby